Voith fluid couplings used in a 48 MW belt conveyor drive in

first_imgChinese coal mining group Xishan Jinxing Energy is using three Voith fill-controlled 866 TPKL fluid couplings underground in the powerful 4.8 MW drive of the main belt conveyor in the Xiegou No 12 coal mine in Shanxi Province. The three 1,600 kW drives power the 1,900 m long main inclined belt conveyor. This conveyor transports 3,800 t/h of coal so powerful and reliable couplings are required and the company opted for the 866 TPKL Voith fluid coupling. Voith states: “Through controlled application of torque, the fluid coupling pretensions the belt slowly and permits smooth conveyor start-up. This controlled soft start protects the belt and driveline components and extends their lifetime. As a result, the Voith fluid coupling reduces unplanned downtime – the operator benefits from lower maintenance costs and continuous production. Regardless of the load state of the belt, start-up times of up to three minutes are possible. Thanks to stand by cooling of the operating oil, the 866 TPKL fluid coupling also permits multiple conveyor start-ups in succession, even when the belt is loaded.”The mine operator is described as being very satisfied with the performance of the 866 TPKL. In contrast to other solutions, the compact fluid coupling is also very capable of withstanding extreme environmental conditions such as dust, dirt, moisture, heat or cold. As in every hydrodynamic coupling, power transmission in the 866 TPKL is virtually wear-free. For the operator, this translates into lower maintenance and repair costs for the coupling. In addition, motors start up independent of the machine load, and through sequenced starting of the motors, the fluid coupling reduces the load on the power supply circuit.An additional benefit of the 866 TPKL is its ability to operate with reduced filling to drive an empty conveyor at a reduced speed. During the creep speed operation, less power is transmitted and the belt runs more slowly. This function is useful for the visual inspection of the belt and splices. In the Xiegou No 12 coal mine, the fluid couplings were operated in the partially filled mode during commissioning to be sure that the belt was tracking properly. With the fluid couplings operating in the partially filled mode, the belt speed could be reduced to 1.2-1.7 m/sec instead of operating at the rated speed of 4.5 m/sec. Until now, the coal mine has been operating at the initially planned production capacity of 15 Mt/y but the operator plans to increase production capacity in the next one to two years. This will require the main belt conveyor to be upgraded with a fourth drive. For this, the operator plans on installing an additional 866 TPKL fluid coupling from Voith.last_img read more